$29.99

Electrical Box Mount for The Paladin 8.0 - EMB26BF8

In stock

Usually ships the same business day if ordered before 2PM EST.

SKU
EMB26BF8

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Electrical Box Mount for The Paladin 8.0 - EMB26BF8Electrical Box Mount for The Paladin 8.0 - EMB26BF8Electrical Box Mount for The Paladin 8.0 - EMB26BF8Electrical Box Mount for The Paladin 8.0 - EMB26BF8

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

**This Electrical Box Mount is only designed for the Warrior 8.0 version 1 that has a round base. All other Warrior models with a square base use the following Electrical Box Mount: EMB26BF.**

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Dimensions: Φ104.4mm*54.5mm (4.11” x 2.15”)

Conduit Entry NPS: 3/4" x2

Weight: 0.80lb

Material: Aluminium alloy

Dimensions: Φ104.4mm*54.5mm (4.11” x 2.15”)

Conduit Entry NPS: 3/4" x2

Weight: 0.80lb

Material: Aluminium alloy

Using Electrical Mounting Boxes

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run EMT or FMC conduit they are necessary to run conduit straight to the camera.