Security Camera Brackets

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pendant mount allows select dome cameras to extend downward from the ceiling.

Allows you to mount our Deputy v2s, Deputy v3s, Sheriff, or Informant dome cameras on the side of the wall indoors or outdoors. Back facing outlet for cable.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

This pendant mount allows select dome cameras to extend downward from the ceiling.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pendant mount allows select dome cameras to extend downward from the ceiling.

Allows you to mount our Deputy v2s, Deputy v3s, Sheriff, or Informant dome cameras on the side of the wall indoors or outdoors. Back facing outlet for cable.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

This pendant mount allows select dome or PTZ cameras to extend downward from the ceiling.

This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.

Allows you to mount our Radius 12.0 or Judge dome cameras on the side of the wall outdoors. Back facing outlet for cable.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera. This electrical box mount is tilted at a 10 degree angle. It only works with the Radius 12.0 because the Radius 12.0 is a larger than average camera, also the Radius 12.0 is the only camera that would benefit from a tilted ceiling mount, as you cannot adjust the angle of view on the Radius 12.0.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

This pendant mount allows select dome or PTZ cameras to extend downward from the ceiling.

This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.

Allows you to mount our Radius 12.0 or Judge dome cameras on the side of the wall outdoors. Back facing outlet for cable.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera. This electrical box mount is tilted at a 10 degree angle. It only works with the Radius 12.0 because the Radius 12.0 is a larger than average camera, also the Radius 12.0 is the only camera that would benefit from a tilted ceiling mount, as you cannot adjust the angle of view on the Radius 12.0.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

This pendant mount allows select dome cameras to extend downward from the ceiling.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

Indoor or outdoor wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope

Dimensions(L × W × H): 7.9" x 5.6” (base) x 9.1” (arm)

Weight: 1.74lb

Material: Aluminum alloy

Sometimes you need to extend a PTZ past an obstruction, which is where you would use a Parapet Mount.

Indoor or outdoor wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope, and The Beacon

Dimensions(L × W × H): 34.6” x 32.7”

Weight: 9.26lb

Material: Aluminum alloy

Indoor or outdoor, PTZ dome pendant installation

Requires a Ceiling Pendant Base Mount.

Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.