Security Camera Brackets

This pendant mount allows select dome cameras to extend downward from the ceiling.

This pendant mount allows select dome cameras to extend downward from the ceiling.

Indoor or outdoor, PTZ dome pendant installation

Requires a Ceiling Pendant Base Mount.

This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.

This pendant mount allows select dome or PTZ cameras to extend downward from the ceiling.

Indoor ceiling/hanging based installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope, The Beacon

Allows you to mount our PTZ cameras from the ceiling via our 500mm (19.685 inches) pendant extension pole: 500mm Pendant Extension for Lookout, Laser, Spotlight, Scope, Beacon - PM26ZV-500

Dimensions: Φ4.6” x 1.2”

Weight: 0.66lb

Material: Aluminum alloy

Requires a Pendant Pole.

Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Indoor or outdoor, wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope, and The Beacon

Dimensions(L × W × H): 8.5” x 5.6” (base) x 12.4” (arm)

Weight: 2.2lb

Material: Aluminum alloy

Allows you to mount our Deputy v1, Garrison 5.0 or Detective or Radius 5.0 camera on the side of the wall outdoors. Back facing outlet for cable.

Allows you to mount our Radius 12.0 or Judge dome cameras on the side of the wall outdoors. Back facing outlet for cable.

Allows you to mount our Radius,12.0 panoramic dome camera or Bastion 4.0 PTZ from the ceiling via our 200mm (7.87402 inches) pendant mount: 200mm Pendant Mount for The Radius, The Sheriff, The Lookout, The Laser, The Spotlight, and The Scope - PM26ZV-200

Allows you to mount our Radius 12.0 panoramic dome camera or Bastion 4.0 PTZ from the ceiling via our 500mm (19.685 inches) pendant mount: 500mm Pendant Mount for The Radius, The Sheriff, The Lookout, The Laser, The Spotlight, and The Scope - PM26ZV-500

Sometimes you need to mount a PTZ on a Pole. Requires either our Short Wall Mount, Long Wall Mount, or Swan Neck Parapet Mount.

Indoor or outdoor wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope

Dimensions(L × W × H): 7.9" x 5.6” (base) x 9.1” (arm)

Weight: 1.74lb

Material: Aluminum alloy

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Sometimes you need to extend a PTZ past an obstruction, which is where you would use a Parapet Mount.

Indoor or outdoor wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope, and The Beacon

Dimensions(L × W × H): 34.6” x 32.7”

Weight: 9.26lb

Material: Aluminum alloy

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera. This electrical box mount is tilted at a 10 degree angle. It only works with the Radius 12.0 because the Radius 12.0 is a larger than average camera, also the Radius 12.0 is the only camera that would benefit from a tilted ceiling mount, as you cannot adjust the angle of view on the Radius 12.0.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Allows you to mount our Deputy v2s, Deputy v3s, Sheriff, or Informant dome cameras on the side of the wall indoors or outdoors. Back facing outlet for cable.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

This pendant mount allows select dome cameras to extend downward from the ceiling.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Allows you to mount our Deputy v1, Garrison 5.0 or Detective or Radius 5.0 camera on the side of the wall outdoors. Back facing outlet for cable.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

Allows you to mount our Deputy v2s, Deputy v3s, Sheriff, or Informant dome cameras on the side of the wall indoors or outdoors. Back facing outlet for cable.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

Allows you to mount our Deputy v2s, Deputy v3s, Sheriff, or Informant dome cameras on the side of the wall indoors or outdoors. Back facing outlet for cable.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

This pendant mount allows select dome cameras to extend downward from the ceiling.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

Allows you to mount our Deputy v2s, Deputy v3s, Sheriff, or Informant dome cameras on the side of the wall indoors or outdoors. Back facing outlet for cable.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Allows you to mount our Deputy v1, Garrison 5.0 or Detective or Radius 5.0 camera on the side of the wall outdoors. Back facing outlet for cable.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

Allows you to mount our Deputy v2s, Deputy v3s, Sheriff, or Informant dome cameras on the side of the wall indoors or outdoors. Back facing outlet for cable.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.

This pendant mount allows select dome or PTZ cameras to extend downward from the ceiling.

Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Electrical Box Transfer Plate for Radius 12.0 and Judge

Allows you to mount our Radius 12.0 or Judge dome cameras on the side of the wall outdoors. Back facing outlet for cable.

Sometimes you need to mount a PTZ on a Pole. Requires either our Short Wall Mount, Long Wall Mount, or Swan Neck Parapet Mount.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera. This electrical box mount is tilted at a 10 degree angle. It only works with the Radius 12.0 because the Radius 12.0 is a larger than average camera, also the Radius 12.0 is the only camera that would benefit from a tilted ceiling mount, as you cannot adjust the angle of view on the Radius 12.0.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

This pendant mount allows select dome cameras to extend downward from the ceiling.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Allows you to mount our Deputy v1, Garrison 5.0 or Detective or Radius 5.0 camera on the side of the wall outdoors. Back facing outlet for cable.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

This pendant mount allows select dome cameras to extend downward from the ceiling.

This pendant mount allows select dome cameras to extend downward from the ceiling.

This Indoor Pendant Mount allows select fixed dome cameras to extend downward from the ceiling. Requires an Electrical Mounting Box for the specified cameras.

This pendant mount allows select dome or PTZ cameras to extend downward from the ceiling.

Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Electrical Box Transfer Plate for Radius 12.0 and Judge

Allows you to mount our Radius 12.0 or Judge dome cameras on the side of the wall outdoors. Back facing outlet for cable.

Sometimes you need to mount a PTZ on a Pole. Requires either our Short Wall Mount, Long Wall Mount, or Swan Neck Parapet Mount.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera. This electrical box mount is tilted at a 10 degree angle. It only works with the Radius 12.0 because the Radius 12.0 is a larger than average camera, also the Radius 12.0 is the only camera that would benefit from a tilted ceiling mount, as you cannot adjust the angle of view on the Radius 12.0.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

This pole mount allows outdoor pole or rail installation for The Warrior, The Viking, The Knight, The Archer, The Gladiator, The Sharpshooter, The Deputy, The Detective, The Sheriff, The Radius, or The Judge.

Dimensions(L × W × H): (5.00”x5.35”x2.45”)

Weight: 0.75lb

Material: Aluminium alloy

Indoor or outdoor, PTZ dome pendant installation

Requires a Ceiling Pendant Base Mount.

This pendant mount allows select dome or PTZ cameras to extend downward from the ceiling.

Indoor ceiling/hanging based installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope, The Beacon

Allows you to mount our PTZ cameras from the ceiling via our 500mm (19.685 inches) pendant extension pole: 500mm Pendant Extension for Lookout, Laser, Spotlight, Scope, Beacon - PM26ZV-500

Dimensions: Φ4.6” x 1.2”

Weight: 0.66lb

Material: Aluminum alloy

Requires a Pendant Pole.

Sometimes you need to mount a PTZ camera on the corner of a building. Requires either our Short Wall Mount, Long Wall Mount, or Parapet Mount.

To mount a Viking, Knight, Archer, Gladiator, or Sharpshooter bullet camera or Lookout Mini PTZ models on the corner of a building requires our EMB26BV electrical mounting box.

To mount a Deputy v1, Detective, or Radius 5.0 camera on the corner of a building requires our OWM26DF outdoor wall mount.

To mount a Deputy v2, Deputy v3, Sheriff, or Informant dome camera on the corner of a building requires our WMB26DF outdoor wall mount.

To mount a Radius 12.0 or Judge dome camera on the corner of a building requires our WMN26P outdoor wall mount.

Our electrical box mounts are used to give easy access to your connections, hide them inside the junction box, and allow you to drill a smaller hole in your wall. If you want to run conduit they are necessary to run conduit straight to the camera.

Electrical box mounts are recommended whenever you are installing a camera outdoors or when running cable through a wall isn't possible. Electrical mounting boxes protect the cable and connector as well as allow for the use of conduit (such as Liquidtight Plastic Tubing, Flexible Metal Conduit, or Electric Metal Tubing) to protect the cable run back to the NVR.

Indoor or outdoor, wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope, and The Beacon

Dimensions(L × W × H): 8.5” x 5.6” (base) x 12.4” (arm)

Weight: 2.2lb

Material: Aluminum alloy

Sometimes you need to mount a PTZ on a Pole. Requires either our Short Wall Mount, Long Wall Mount, or Swan Neck Parapet Mount.

Indoor or outdoor wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope

Dimensions(L × W × H): 7.9" x 5.6” (base) x 9.1” (arm)

Weight: 1.74lb

Material: Aluminum alloy

Sometimes you need to extend a PTZ past an obstruction, which is where you would use a Parapet Mount.

Indoor or outdoor wall installation for our Admiral Line PTZ cameras: The Lookout, The Laser, The Spotlight, The Scope, and The Beacon

Dimensions(L × W × H): 34.6” x 32.7”

Weight: 9.26lb

Material: Aluminum alloy